Table of contents
- 1.Average sanitization & disinfection price
- 2.Price by size or scale
- 3.What drives the cost up or down
- 4.What is included in our price
- 5.What can cost extra
- 6.How to avoid overpaying
- 7.Professional cost vs the cost of doing nothing
- 8.Save money with an annual contract
- 9.Get a free quote
- 10.Frequently asked questions
Quick answer
Sanitization & Disinfection in Mumbai, Navi Mumbai, Thane and Panvel typically costs ₹1.5–₹3 per sq. ft.. The final price depends on size, condition, access and timing, and is confirmed only after a site survey. Commercial Cleaning Mumbai gives a free site survey and a fixed written quote with no hidden charges, covering ulv fogging through to certificate issued.
Key takeaways
- Typical rate: ₹1.5–₹3 per sq. ft.
- Size, dirt level, access and timing change the final price the most
- Always get a fixed written quote after a site visit, never a phone-only estimate
- Annual contracts usually lower the per-visit cost
- Everything in "what's included" below is in the base price, not an extra
- Ask for before/after photos and a completion report before paying the balance
Average sanitization & disinfection price
Sanitization & disinfection is priced per job, not at a flat national rate, because site size, condition and access all change the work involved.
Across our service areas, most sanitization & disinfection jobs fall in the range of ₹1.5–₹3 per sq. ft.. Small jobs carry a minimum visit charge, while large commercial sites get volume pricing once the total size or capacity is known.
Price by size or scale
A single rate rarely tells the whole story, so here's roughly how the quote tends to move with scale:
| Scale / scenario | What changes | Typical time on site |
|---|---|---|
| Low-rise / single floor | Standard day-rate | Half a day to one day |
| Mid/high-rise facade | Rope-access/BMU surcharge applies | Multiple days depending on floors |
| Single kitchen exhaust system | Flat per-system rate | Half a day |
| Large post-construction site | Volume rate, phased by zone | Several days to a week |
What drives the cost up or down
Beyond basic size, these are the factors that actually move a quote:
| Cost driver | How it affects price |
|---|---|
| Height and access method | rope-access or BMU work costs more than ground-reachable work |
| Surface type | glass, ACP, natural stone and painted surfaces need different tools and chemicals |
| Duct length or floor area | longer ducts and bigger floors mean more machine time |
| Degree of neglect | years of grease or construction debris takes longer to strip than routine upkeep |
| Safety planning | insurance and method statements for height work add to the quote |
| Scheduling | night or holiday work to avoid disrupting business can carry a surcharge |
What is included in our price
Every sanitization & disinfection job from Commercial Cleaning Mumbai includes the following as standard — none of it is billed as an extra:
- ULV fogging
- Touch-point disinfection
- Approved disinfectants
- PPE-equipped crew
- Safe re-entry time
- Certificate issued
What can cost extra
Most sanitization & disinfection jobs need nothing beyond the list above. Occasionally a site adds a genuine extra — for example a second tank or a far larger area discovered on survey, after-hours surcharges, or a specific add-on like water testing. Any extra is always shown in the written quote before work starts, never added afterwards.
Good to know
If you need a GST invoice for your accounts, ask for one before booking — a registered vendor will issue it as a matter of course.
How to avoid overpaying
Compare quotes on the same written scope, not just the final number. A much cheaper quote often means a step has been dropped — using harsh chemicals that etch glass, stone or metal is a common one. For sanitization & disinfection, that's not a generic rule — it's where most shortcuts actually happen.
- Are your technicians trained and certified for rope-access or height work?
- Is the crew covered by insurance for work at height?
- Will you show me the duct interior before and after, not just the hood?
- What chemical will you use on our specific glass/stone/ACP surface?
- Can the job be scheduled at night or on a holiday to avoid disrupting business?
Professional cost vs the cost of doing nothing
Facade cleaning attempted without rope-access training risks a fall or a dropped-tool injury to someone below. Kitchen duct cleaning that only wipes the visible hood and skips the duct interior leaves grease exactly where fire inspectors look. Post-construction cleaning that skips a final dust pass leaves cement film on glass and fixtures that hardens and becomes far harder to remove later.
Weighed against that, ₹1.5–₹3 per sq. ft. for scheduled, documented sanitization & disinfection is a small and predictable cost.
Save money with an annual contract
Because sanitization & disinfection is needed every 3–6 months for facades, ducts and floors, and once at handover for post-construction work, an annual maintenance contract locks in your rate, fixes the schedule and removes the effort of re-booking and re-negotiating every time.
Need sanitization & disinfection?
Free site survey and fixed written quote. Rates from ₹1.5–₹3 per sq. ft..
Available in Mumbai, Navi Mumbai, Thane, Panvel.
Frequently asked questions
Written and maintained by the Commercial Cleaning Mumbai team, based on hands-on sanitization & disinfection jobs across Mumbai, Navi Mumbai, Thane and Panvel. We review this page whenever our process, pricing or guidance changes, and the "updated" date above always reflects the last review.